Some tips for home beautifying：Autumn wall maintenance manual

 

The autumn climate is dry, people do not pay attention to maintenance, the skin is easy to appear problem.Metope, too, during decorating negligence, ignore use process, all kinds of metope problem broke out at the time of autumn, metope should how to solve the problem?Autumn metope maintenance method?With small make up take a look.

Small area crack blow be bored with child

Putty shrinkage will cause the crack of wall, cracks will need to clean, remove the irregular, float plaster pieces, put the putty on the cracks, wait for after its are fully dry brush again on metope lacquer.Cracks bigger would need to fill in the cement and other fillers.

The drum local shave their metope

Paint impurity or water vapor infiltration leads to metope appears bullate, a touch will fall, need to be blister part along with the size of about 1 cm around plaster scraped, and shave their part of the edge grinding smooth, fill putty, paint again.

Metope mildewy to sterilization

Damp conditions can easily lead to metope mildewy, and high temperature and high humidity in summer is not suitable for processing moldy metope.Blow mold parts processing mold wall is, the metope besmear after clean dry putty, with lime to moisture absorption before besmear brushs metope.

Metope clean

Autumn of metope cleaning should pay attention to keep dry, timely discover metope have dirty mark to erase.For water resistant metope can swab with cloth, after washing with dry towel blot;For water resistant metope, can use eraser or dip in with towel some cleaning fluid after twist dry graze.Near the metope of the kitchen or bathroom corner can put some dried tea or quick lime, absorb moisture, prevent mildew.

Wallpaper clean

Daily cleaning a feather duster to remove dust with cleaner as long as you can.Every 3-6 months, can dip in with sponge, after takes the dilution the cleaner to twist dry sponge to wipe, after this is to prevent too much water and sponge water seeping into the wallpaper, lead to the wallpaper moldy.

Pay attention to the difference in temperature

Autumn temperatures began to decline, but the light is still as strong.When indoor and open air conditioning, pay attention to and outdoor temperature difference, try to keep the gap within 10 ℃, high temperature will make metope inside and outside layer of uneven and, wall body appear all sorts of problems easily.Avoid direct sunlight on indoor metope at the same time, easy to affect metope lacquer layer.

The ventilation time

The summer climate is dry, the moisture will send out faster.Ventilation time every day is the best in the morning or in the evening, this time the temperature is lower, the moisture in the air is abundant;If at the time of the day ventilated, easy to take away the indoor moisture, result in the crack of the metope is dry.

Pre: Wallpaper sales: how to choose a good wallpaper for the customer?

Next: Wallpaper of postmodern thinking: brand merchants should have new meaning